Sunday, March 1, 2015

Dealing with snow and ice dams in traditional roof systems

By mid-January of 2015 it seemed like Mother Nature had forgotten to deliver winter to those of us in the Northeast.  Over the next four weeks, however, Boston and other parts of New England experienced record-breaking snowfalls that would challenge season-long records in a single month.  And, with these extreme conditions, has come ice damming, water intrusion and threatening snow loads the likes of which had never been seen.

As this graphic demonstrates, ice damming occurs when heat loss causes snow to melt and slide down the slope of the roof.  As it reaches the part of the roof over the soffit, it freezes because there is no heat loss occurring.  The result is a buildup of ice that makes it increasingly difficult for melt water to escape as the ice grows in height.  The problem may be exacerbated by gutters which are clogged or don’t drain properly and, in essence, form an icy shelf on which the ice dam may grow.

Once the melt water begins to pool up it will wick back under the roof covering materials and into the building.  Ice dams must be removed without damaging the roof covering materials.  This may involve hand tools, chipping guns and steaming equipment.  The ice dams may be so extensive that the best and/or most cost effective approach is to open channels in the dams and coat the ice with calcium chloride to accelerate the melting process. 


Once this winter is over, countless home and building owners will want to make improvements and alterations to prevent future ice damming and water intrusion.  The first, and simplest measure, is to make sure that gutters, outlets, conductor pipes, and drainage inlets at grade are free and clear of obstructions.  Next, look at the way the building is insulated.  The addition of fiberglass insulation between roof rafters or the attic floor joists will make a huge improvement.  The use of closed-cell, spray foam insulation should be resisted (see http://traditional-building.com/Ward_Hamilton/?p=379for more information.)

More involved measures are also available.  The use of heating coils or, “heat tape,” is often employed to keep the snow and ice over the soffit melted and the snow melt water flowing.  If you want to investigate this method further, seek and obtain quotes from three firms that specialize in these systems.  Products sold at home improvement centers, designed to be installed by the purchaser, may have trouble keeping up with even normal snowfalls.  Seek out “commercial grade,” industrial-strength systems installed by professionals, even for residential applications.

Another option is the installation of snow slides, or snow “pans,” over the soffit.  Commonly made of copper sheet metal, they form a virtually impermeable layer that ice has trouble bonding with.  While less expensive materials like galvanized steel may be used, the short term savings should be weighed against the long-term cost when the lesser metal outlives its useful service life and must be replaced.  These systems are commonly seen in Upstate New York and Vermont, and seen less frequently in other regions of the Northeastern and Mid-Atlantic states.        


Because of a general lack of insulation in their roofs, ice damming is not uncommon in older buildings. The problems that they can cause when water infiltration damages interior finishes necessitates removal and, where possible, prevention.  Care must be taken to remove the snow and ice safely and without damaging roof covering materials, gutters and cornices.  By keeping gutters clean and clear, and adding insulation, much of the cause of the ice dams may be mitigated.  Installation of heat tape and snow pans will further reduce the chances of ice dams from forming but are not inexpensive.  Always consult with an experienced, traditional building professional before undertaking such a project.

Contact us by clicking here now


7 comments:

  1. I just couldn't leave your website before telling you that I truly enjoyed the top quality info you present to your visitors? Will be back again frequently to check up on new posts.
    Certified Precision Roofing

    ReplyDelete
  2. If you'd like an easy way to earn part-timeincome by doing something FUN, go check this out now:

    ==> http://www.woodprofits.com?fhasdjgaf66r283

    My friend Jim, has successfully run a HIGHLY profitable woodworking business from home and he has just released his step-by-step blueprint.
    Read His Amazing Story:

    ==> http://www.woodprofits.com?fhasdjgaf66r283

    It is a no-fluff step by step guide to create a part-time woodworking business, selling easy-to-build wood crafts, from HOME...with NO capital or experience required.

    ==> http://www.woodprofits.com?fhasdjgaf66r283

    He started out with little carpentry skills and run a business in a 10x20 feet spacewith ZERO capital....But managed to made $9000 per month as a one-person business within the FIRST year!
    The cool thing is, you don't have to be an expert woodworker to start this business as it's packed with solid STEP-BY-STEP instructions and information on what to do to turn your *passion into profit*.

    ReplyDelete

  3. My friend Jim, has successfully run a HIGHLY
    profitable woodworking business from home
    and he has just released his step-by-step blueprint.

    Read His Amazing Story:
    ==> http://www.woodprofits.com?fhasdjgaf66r283

    It is a no-fluff step by step guide to
    create a part-time woodworking business,
    selling easy-to-build wood crafts, from HOME
    ...with NO capital or experience required.

    ==> http://www.woodprofits.com?fhasdjgaf66r283

    He started out with little carpentry skills
    and run a business in a 10x20 feet space
    with ZERO capital....

    But managed to made $9000 per month
    as a one-person business within the
    FIRST year!

    The cool thing is, you don't have to
    be an expert woodworker to start
    this business as it's packed with solid
    STEP-BY-STEP instructions and
    information on what to do to turn
    your *passion into profit*.

    ReplyDelete
  4. If you want to choose the best home renovations Mississauga, here are several that will give you the biggest bang for your buck when the time comes to sell.

    ReplyDelete
  5. Thanks for your best information, Do you have need kitchen cabinets around calgary? Our skilled staff is ready for providing perfect service for your kitchen, Our service include Kitchen cabinets in Calgary, bathroom vanity, kitchen renovation,Custom Kitchen Cabinets in Alberta at affordable price.

    ReplyDelete
  6. Giao digitale - stillcasino.com - Still Casino
    You can find the current gioco digitale Giao digitale in the 1xbet lobby, starvegad and use your browser's settings to download the games.

    ReplyDelete
  7. In the GTA, Apeiro Construction is the go-to company for custom home builders. They have an unmatched dedication to innovation, sustainability, and working with clients. You need to go no further than Apeiro Construction if you're searching for a builder that values both originality and quality.
    custom home builders in GTA

    ReplyDelete